Graphene Oxides Derivatives Prepared by an Electrochemical Approach: Correlation between Structure and Properties
Autores
Sainz Urruela, Carlos; Vera López, María Soledad; San Andrés Lledó, María Paz; Díez Pascual, Ana MaríaIdentificadores
Enlace permanente (URI): http://hdl.handle.net/10017/49671DOI: 10.3390/nano10122532
ISSN: 2079-4991
Fecha de publicación
2020-12-17Filiación
Universidad de Alcalá. Departamento de Química Analítica, Química Física e Ingeniería QuímicaCita bibliográfica
Nanomaterials, 2020, v. 10, n. 12, p. 2532-2550
Palabras clave
Óxido de grafeno
Relación estructura-propiedad
Topografía de la superficie
Espaciado entre capas
Estabilidad térmica
Propiedades mecánicas
Proyectos
info:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020/PGC2018-093375-B-I00/ES/FUNCIONALIZACION DE GRAFENO Y SUS DERIVADOS CON BIOTENSIOACTIVOS Y COMPUESTOS BIOACTIVOS COMO NUEVA HERRAMIENTA PARA LA DETERMINACION DE COMPUESTOS DE INTERES BIOLOGICO/
Tipo de documento
info:eu-repo/semantics/article
Versión
info:eu-repo/semantics/publishedVersion
Derechos
Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
Derechos de acceso
info:eu-repo/semantics/openAccess
Resumen
Graphene oxide (GO) can be defined as a single monolayer of graphite with oxygen-containing functionalities such as epoxides, alcohols, and carboxylic
acids. It is an interesting alternative to graphene for many applications due
to its exceptional properties and feasibility of functionalization. In this
study, electrochemically exfoliated graphene oxides (EGOs) with different
amounts of surface groups, hence level of oxidation, were prepared by an
electrochemical two-stage approach using graphite as raw material. A complete
characterization of the EGOs was carried out in order to correlate their
surface topography, interlayer spacing, defect content, and specific surface
area (SSA) with their electrical, thermal, and mechanical properties. It has
been found that the SSA has a direct relationship with the d-spacing. The EGOs
electrical resistance decreases with increasing SSA while rises with increasing
the D/G band intensity ratio in the Raman spectra, hence the defect content.
Their thermal stability under both nitrogen and dry air atmospheres depends on
both their oxidation level and defect content. Their macroscopic mechanical
properties, namely the Young's modulus and tensile strength, are influenced by
the defect content, while no correlation was found with their SSA or interlayer
spacing. Young moduli values as high as 54 GPa have been measured, which
corroborates that the developed method preserves the integrity of the graphene
flakes. Understanding the structure-property relationships in these materials
is useful for the design of modified GOs with controllable morphologies and
properties for a wide range of applications in electrical/electronic devices.
Ficheros en el ítem
Ficheros | Tamaño | Formato |
|
---|---|---|---|
Graphene_Sainz_Nanomaterials_2 ... | 2.722Mb |
|
Ficheros | Tamaño | Formato |
|
---|---|---|---|
Graphene_Sainz_Nanomaterials_2 ... | 2.722Mb |
|
Colecciones
- QUANING - Artículos [367]