RT info:eu-repo/semantics/article T1 Balanced quasi-elliptic-type combline diplexer with multiextracted-pole junction/output sections A1 Gómez García, Roberto A1 Yang, Li A1 Muñoz Ferreras, José María K1 Balanced diplexer K1 Balanced filter K1 Common-mode suppression K1 Differential-mode diplexer K1 Differential-mode filter K1 Microstrip diplexer K1 Planar diplexer K1 Transmission zero (TZ) K1 Telecomunicaciones K1 Telecommunication AB A class of coupled-multiline quasi-elliptic-type balanced diplexer device with closely spaced channels and its balanced coupling-routing-diagram formalism to simultaneously model its differential- and common-mode operation are reported. It employs third-order combline-type bandpass filters (BPFs) in its filtering channels, whose resonating lines are connected at one of their extremes to the symmetry plane of the balanced-circuit structure (i.e., virtual grounds for the differential mode), along with a multiextracted-pole/coupled-multiline dual-band BPF junction and single-band BPF output cells. In differential-mode operation, the dual-band BPF junction adds one in-band pole to each diplexer channel and three transmission zeros (TZs) to both channels, whereas the single-band BPF output cells incorporate one in-band pole and two TZs in their corresponding channels. In this manner, increased-selectivity differential-mode BPF transfer functions for the diplexer channels when compared to those of its third-order combline-type BPFs are obtained. Grounded resistors are connected at the symmetry plane of the balanced diplexer for all the resonating lines of the combline-type BPFs, which become detuned with regard to the poles associated with the dual-band BPF junction and the single-band BPF output cells under common-mode excitation. This allows for high common-mode suppression levels in wide spectral ranges to be realized for both channels while maintaining the same TZs as in differential-mode operation. For practical-validation purposes, a 1.6-GHz/1.8-GHz microstrip prototype is manufactured and tested. PB IEEE SN 1531-1309 YR 2020 FD 2020-05-06 LK http://hdl.handle.net/10017/45191 UL http://hdl.handle.net/10017/45191 LA eng NO Ministerio de Economía, Industria y Competitividad DS MINDS@UW RD 28-mar-2024