Non-linearity analysis of depth and angular indexes for optimal stereo SLAM
Identifiers
Permanent link (URI): http://hdl.handle.net/10017/43550DOI: 10.3390/s100404159
ISSN: 1424-8220
Publisher
MDPI
Date
2010-04-26Funders
Ministerio de Ciencia e Innovación
Comunidad de Madrid
Bibliographic citation
Bergasa, L.M., Alcantarilla, P.F. & Schleicher, D. 2010, “Non-linearity analysis of depth and angular indexes for optimal stereo SLAM”, Sensors, vol. 10, no. 4, pp. 4159-4179
Keywords
Extended Kalman filter
Localization
Mapping
Inverse depth parametrization
Non-linearity analysis
2D warping
Project
Info:eu-repo/grantAgreement/MICINN//TRA2008-03600
info:eu-repo/grantAgreement/CAM//S-0505%2FDPI%2F000176
Document type
info:eu-repo/semantics/article
Version
info:eu-repo/semantics/publishedVersion
Publisher's version
https://doi.org/10.3390/s100404159Rights
Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Access rights
info:eu-repo/semantics/openAccess
Abstract
In this article, we present a real-time 6DoF egomotion estimation system for indoor environments using a wide-angle stereo camera as the only sensor. The stereo camera is carried in hand by a person walking at normal walking speeds 3–5 km/h. We present the basis for a vision-based system that would assist the navigation of the visually impaired by either providing information about their current position and orientation or guiding them to their destination through different sensing modalities. Our sensor combines two different types of feature parametrization: inverse depth and 3D in order to provide orientation and depth information at the same time. Natural landmarks are extracted from the image and are stored as 3D or inverse depth points, depending on a depth threshold. This depth threshold is used for switching between both parametrizations and it is computed by means of a non-linearity analysis of the stereo sensor. Main steps of our system approach are presented as well as an analysis about the optimal way to calculate the depth threshold. At the moment each landmark is initialized, the normal of the patch surface is computed using the information of the stereo pair. In order to improve long-term tracking, a patch warping is done considering the normal vector information. Some experimental results under indoor environments and conclusions are presented.
Files in this item
Files | Size | Format |
|
---|---|---|---|
NonLinearity_Bergasa_Sensors_2 ... | 564.1Kb |
![]() |
Files | Size | Format |
|
---|---|---|---|
NonLinearity_Bergasa_Sensors_2 ... | 564.1Kb |
![]() |
Collections
- ELECTRON - Artículos [152]
- ROBESAFE - Artículos [37]